DAILY DOSE of DOORS
Tuesday, July 31, 2012
Repair in Costa Mesa
Got a call to balance out this low-headroom door and do some basic service on it. This was a tough installation with minimal headroom to work with.
Friday, July 27, 2012
New Garage Doors in Foothill Ranch
Couple bought this house and are doing a full remodel here before they move in. He demoed the garage, gave it a coat of paint, and is going to epoxy the floors after I get the garage doors in. Good luck guys!
www.uniquegaragedoor.com
www.uniquegaragedoor.com
Thursday, July 26, 2012
Teak Garage Doors
This customer in Newport Coast designed and ordered these doors direct from Bali. He did a fantastic job of designing them and contacted me to do the install. We used the best hardware possible and Liftmaster 8550's to automate them. I used heavy duty hardware, track and springs to ensure years of great operation. I learned a lot about Bali and really admire their carving skills and craftsmanship. Kudos to this customer too, he was great to work with!
Basic Wood Door with Bright Paint in Newport Beach
This was a basic wood door, but the customer really made it stand out by painting it this peach color and painting the trim around it a complementary green color.
Worn Out Bearing
The bearing on this bearing plate completely gave out causing the torsion system to completely fail. I replaced both bearing plates and reset the torsion system. The customer was pulling his golf clubs out for a 10am tee off in Newport Beach.
Gear and Sprocket Replacement
A common repair on older Liftmaster chain drives. I replace about 2 of these a week throughout Orange County.
Repair on an RV Garage Door
Got an emergency call in the evening to repair this 12' tall RV door in Mission Viejo. Put the cables back on and serviced the door. Also, we had to replace the gear and sprocket on a Liftmaster chain drive.
Thursday, July 12, 2012
Teak Doors in Newport Coast, Imported From Bali.
My customer designed these teak doors with hand-carved detail straight from Bali. He did a great job on the details and specs, allowing me to do a solid installation.
Subscribe to:
Posts (Atom)